
Fire alarms · London
Fire alarm installation in London
Lumina Fire & Security is a Kent-based fire alarm company carrying out fire alarm installation across London for commercial, public and residential buildings. We survey the building, choose between conventional, addressable and wireless systems, then install, commission and certify the system and train your staff to use it.
- 3 system typesConventional, addressable or wireless
- Survey firstSystem designed around the building
- Fire + securityOne contractor for both
Conventional, addressable or wireless: which suits your building?
A conventional system splits the building into zones, so the panel tells you which area a fire is in but not which device. That is often enough for a small shop or single-floor office. Addressable systems identify the exact detector or call point, which matters in larger offices, schools and multi-storey buildings where finding the source quickly saves time. Wireless devices suit places where running new cable is disruptive or not allowed, and can be mixed with wired loops.
- Conventional: simple zoned systems for smaller premises
- Addressable: device-level detail for larger or complex sites
- Wireless: little or no cabling through finished interiors
- Hybrid wired and wireless where part of a building is hard to reach
BS 5839-1 categories and BS 5839-6 grades in London buildings
Commercial premises are normally designed in line with BS 5839-1, which sets categories such as L (life protection), P (property protection) and M (manual call points only). Homes, flats and many HMOs fall under BS 5839-6, which uses grades and categories such as Grade D1 LD2. London has a lot of mixed-use stock, like a shop with flats above, where the commercial unit and the residential floors may need different approaches and a clear interface between them. Your fire risk assessment should set the level, and we design to it.
- Category L1 to L5 and P1 to P2 for non-domestic premises
- Grade and category for HMOs and converted flats
- Separate design for shop and flats in mixed-use buildings
- Design follows the fire risk assessment, not guesswork
Cable routes in period buildings and fitted-out offices
Much of London is Victorian and Edwardian terracing, converted houses and older commercial buildings, often in conservation areas across boroughs like Islington, Camden and Westminster. Ornate ceilings, solid walls and listed features limit where cable can go. In modern office fit-outs the challenge is different: raised floors, suspended ceilings and landlord rules on working hours. We plan routes at survey stage, use fire-resistant cable where the standard calls for it, and suggest wireless devices where a cable run would damage the fabric.
- Routes planned to avoid damaging period features
- Fire-resistant cable used where the design requires it
- Out-of-hours working agreed for occupied offices
- Wireless devices where cabling is impractical
How the job works
- 1Walk the building and read the risk assessmentWe look at layout, use, occupancy and existing wiring, and check what your fire risk assessment asks for before suggesting a system type.
- 2Design the system and agree cable routesYou get a written proposal showing the category or grade, device positions, panel location and how cables will be run through the building.
- 3Install with the building in useWork is sequenced around tenants, trading hours or residents, with areas made safe and tidy at the end of each day.
- 4Commission, certify and trainEvery device is tested, the system is certified, and the people responsible are shown how to run weekly tests and read the panel.
What you get from Lumina in London
- A free survey before any recommendation, so the system type is chosen for your building rather than from a price list.
- Installation, servicing and repairs from the same contractor, so the people who fitted the alarm also look after it.
- Fire alarms, CCTV and access control handled together where a building needs more than one system.
More local services
Official guidance
Last reviewed: November 2026
Common questions
Do I need a fire alarm in a shop with flats above it?
Usually some form of detection and warning is needed, but the right system depends on the layout, the escape routes and whether the flats share an exit with the shop. Your fire risk assessment should set this out. We can design a system that covers the commercial unit and the residential parts appropriately, with the interface between them agreed at survey.
Can a wireless fire alarm be used in a listed building?
Often, yes. Wireless devices reduce the amount of cable and fixing through historic fabric, which can make approval easier. You should still check with the local planning authority about any visible changes to a listed building. We can propose device positions that keep the impact low and explain the options before you apply.
Can you replace an old panel without rewiring the whole building?
Sometimes. If the existing cabling is in good condition and suitable for the new system, a panel and device upgrade can reuse it. Where cable is damaged, undersized or not fire-resistant where it needs to be, some rewiring will be needed. We test and inspect the existing installation at survey before advising.
Get in touch
Talk to us about Fire Alarms in London.
Free, no-obligation surveys and quotes for commercial, public and residential properties. Call us or drop us an email and we will get straight back to you.