
Security
CCTV Installation & Service from Kent, across the South East
Clear footage, sensible camera placement and simple remote viewing. We install and maintain CCTV systems for homes, businesses and public buildings.
CCTV for commercial, public and residential buildings
HD and IP camera systems with remote viewing from your phone. Lumina Fire & Security, Kent-based, provides cctv work across the South East.
What is included
- HD and IP camera systems
- Remote viewing on phone and desktop
- Recorder setup and storage planning
- Servicing, upgrades and repairs
Analogue HD or IP cameras: which system suits you?
Analogue HD cameras run over coaxial cable to a DVR and are often the sensible upgrade where old cabling can be reused. IP cameras send footage over network cable to an NVR, usually powered over the same cable (PoE), and offer higher resolutions and smarter analytics. Lens choice matters as much as megapixels: a wide lens covers a yard, a varifocal or narrower lens is what gets a usable face or number plate at a gate.
- Analogue HD can reuse existing coax runs on many upgrades
- IP with PoE needs one network cable per camera
- Varifocal lenses set the field of view on site
- Infrared or colour low-light models for night-time detail
Recording, storage and remote viewing
How long you keep footage depends on the number of cameras, resolution, frame rate and whether the recorder runs continuously or on motion. A retention period that suits the site is set first, then the hard drive is sized to it rather than the other way round. Remote viewing is set up on the recorder’s app with separate user logins, so staff can see live cameras without being able to delete recordings.
- Drive capacity sized to the retention period you need
- Motion or continuous recording set camera by camera
- App and desktop viewing with individual user accounts
- Footage export tested so it can be handed over when asked
CCTV and the law: what businesses and homeowners should know
A business using CCTV is processing personal data under UK GDPR, so it needs a clear purpose, visible signage, a sensible retention period and a way to answer subject access requests. The Information Commissioner’s Office publishes guidance on this. Domestic cameras that only cover your own property sit outside data protection law, but once they capture a pavement, road or a neighbour’s garden the ICO expects you to follow the same principles, so we angle and mask cameras with that in mind.
- Signage telling people that CCTV is in operation
- Privacy masking over neighbouring windows and gardens
- Retention kept to what the purpose needs
- Business owners remain the data controller for their footage
Planning camera positions around a property
Good coverage comes from deciding what each camera is for before choosing where it goes. An overview camera shows that something happened; an identification camera at a door, gate or till is set close and narrow enough to capture a face or number plate. Mounting height is a balance: high enough to resist tampering, low enough to see under hoods and caps. Backlight from glazed entrances, low winter sun and headlights all affect the picture, so cameras facing bright openings need wide dynamic range. Cable routes, power and a secure spot for the recorder are planned at the same time.
- Each camera given a purpose: overview, recognise or identify
- Mounting height chosen to deter tampering but still see faces
- Wide dynamic range for cameras facing doors and windows
- Recorder placed out of sight in a secure, ventilated spot
Common faults we find on existing CCTV systems
Many systems we are asked to look at still record, but not usefully. Hard drives fail or fill up and overwrite footage sooner than expected, recorder clocks drift so timestamps are wrong, and cameras get knocked, overgrown by plants or covered in cobwebs that trigger motion recording all night. Infrared light can bounce off a nearby wall or soffit and wash out the image. Remote viewing often stops working after a broadband router is changed. Most of these are put right with cleaning, realignment, a new drive or reconfiguration rather than new cameras.
- Failed or full hard drives losing recent footage
- Recorder date and time drifted out of step
- IR glare from walls, soffits or dirty domes
- App access lost after a router change
How the job works
- 1Site walk and viewing goalsWe walk the property with you, note approach routes and problem spots, and agree what each camera needs to show before any equipment is specified.
- 2Camera schedule and itemised quoteYou receive a schedule listing each camera’s position, lens type and purpose, plus the recorder size and retention period, priced item by item.
- 3Installation and image set-upCameras, cabling and the recorder are fitted, then each image is focused, privacy-masked where needed and checked in daylight and after dark.
- 4Remote access and footage exportUser logins are set up on your phone and computer, you are shown how to find and export footage, and the recorder settings are documented.

CCTV near you
Local pages with details for the areas we cover most, plus every county and city we work in.
- CCTV installation in London
- CCTV installation in Croydon
- CCTV installation across Kent
- CCTV installation in Maidstone
- CCTV installation in Medway
- CCTV installation in Dartford
- CCTV installation in Essex
- CCTV installation in Surrey
- Fire & security in London
- Fire & security in Kent
- Fire & security in Maidstone
- Fire & security in Canterbury
- Fire & security in Essex
- Fire & security in Surrey
- Fire & security in Sussex
Official guidance
Last reviewed: November 2026
CCTV: common questions
What affects the cost of a CCTV installation?
The main factors are the number of cameras, whether they are analogue HD or IP, how far and how hard the cable runs are (through lofts, ceilings or external walls), the recorder and storage size needed for your retention period, and any extras such as long-range lenses or high-level access equipment. Reusing sound existing cabling can bring the cost down. A free survey gives you a fixed, itemised quote rather than a guess.
Is commercial CCTV installation different from a home system?
Usually, yes. Commercial sites tend to need more cameras, longer cable runs, larger recorders, multiple user accounts with different permissions, and a clear approach to UK GDPR including signage and a retention policy. Cameras covering tills, loading bays or car parks are also chosen for detail at a distance rather than general overview. Homes typically need fewer cameras, simpler app access and careful aiming to avoid filming neighbours.
How many cameras does a typical property need?
It depends on what you want to see, not floor area. Start with the routes people use to approach and enter: doors, gates, driveways and side passages. Then add cameras for anything you want to identify, such as a till or a vehicle entrance. A survey walks the site to cover those points without wasted overlap, and you can add cameras later if the recorder has spare channels.
Can you service or upgrade CCTV that someone else installed?
Yes, in most cases. We can clean and realign cameras, replace failed units or hard drives, update recorder firmware and set up remote viewing on an existing system. Where an older analogue system is past saving, we will tell you which parts, such as cabling or housings, are worth keeping in an upgrade so you are not paying to replace everything.
Related services
Get in touch
Talk to an engineer about your building.
Free, no-obligation surveys and quotes for commercial, public and residential properties. Call us or drop us an email and we will get straight back to you.