
Security
Intruder Alarm Servicing & Takeovers from Kent, across the South East
Whether you need a new intruder alarm, want us to take over an existing system, or need remedial works after an inspection, we keep your alarm working as it should.
Intruder Alarms for commercial, public and residential buildings
New systems, takeovers of existing alarms and routine servicing. Lumina Fire & Security, Kent-based, provides intruder alarms work across the South East.
What is included
- New intruder alarm installations
- System takeovers and upgrades
- Remedial works
- Scheduled servicing
Why intruder alarm servicing matters
Alarms fail quietly. Standby batteries lose capacity, detector lenses collect dust and cobwebs, door contacts drift out of line and signalling paths change when phone lines or SIMs are switched. A service visit tests each of these, so faults are found on a planned visit rather than by a false alarm at night or a system that does not signal when it should.
- Panel and siren standby batteries load-tested
- Every detector walk-tested and cleaned
- Tamper circuits and door contacts checked
- Signalling path or app connection test-sent
Taking over an existing alarm system
If your previous installer has stopped trading or you simply want a new contractor, an alarm can often be taken over rather than replaced. Whether that is possible depends on the panel make and model, its condition and whether the engineer code can be accessed or reset. This is confirmed at a survey, along with any parts that need upgrading before a maintenance agreement starts.
- Panel make, model and age recorded at survey
- Engineer code access checked before anything is changed
- Existing detectors and wiring assessed for reuse
- Zones and user codes documented for your records
Remedial works after an insurer or inspection report
Insurers, surveyors and inspection visits sometimes list defects that need putting right, such as an unprotected rear door, a failing siren or a system below the grade the policy requires. We work through the list item by item, quote for each, and give you a written record of what was done to send back to the insurer.
- Missing coverage added to doors, windows or rooms
- Failed sirens, keypads or detectors replaced
- Signalling upgraded where the policy requires it
- Written record of completed remedials for your insurer
Which premises should keep an alarm on a service schedule?
Any alarm benefits from servicing, but some premises have clear reasons to keep it on a schedule. Commercial insurers often make a maintained, working alarm a condition of cover, and some set the frequency. Landlords and managing agents with alarms in let properties or communal areas need a record that the system has been looked after. Premises left empty for long periods, such as offices, storage units and second homes, depend on the alarm working when nobody is around to notice a fault. Monitored systems also tend to come with servicing requirements in the agreement.
- Businesses where insurance depends on a working alarm
- Landlords and agents with alarms in let or shared buildings
- Offices, units and homes left empty for long spells
- Monitored systems with servicing set out in the agreement
Upgrading an ageing alarm panel and its signalling
Older panels often still work but limit what you can do. Many cannot send app notifications, have no spare zones for new detectors and use parts that are getting hard to find. Signalling is the other weak point: as UK landlines move to digital services, some diallers built for traditional phone lines may stop passing alarms reliably, and communicators that rely on older mobile networks face the same problem as those services are retired. An upgrade can often keep sound wiring, contacts and detectors while replacing the panel, keypad or communicator, so the spend goes where it is needed.
- Panels without app control or spare zones
- Diallers tied to traditional phone lines
- Communicators using older mobile networks
- Existing wiring and detectors reused where sound
How the job works
- 1Review the existing systemWe record the panel make, model, age and zone layout, check the event log and confirm whether the engineer code can be accessed or reset.
- 2Agree a servicing scheduleVisit frequency is set around your insurer, monitoring agreement and how the building is used, with any remedial items priced separately beforehand.
- 3Carry out the planned serviceBatteries, detectors, contacts, sirens and signalling are tested on each visit, with worn parts flagged and small adjustments made while the engineer is on site.
- 4Build a maintenance historyA service report is left after every visit, giving you a dated record you can show an insurer, landlord or auditor when asked.

Intruder Alarms near you
Local pages with details for the areas we cover most, plus every county and city we work in.
Last reviewed: November 2026
Intruder Alarms: common questions
How often should an intruder alarm be serviced?
Most systems should be serviced at least once a year, and many monitored or commercial systems are serviced twice a year. Your insurer or monitoring agreement may set the frequency, so check those documents first. Regular visits keep batteries, detectors and signalling in working order and give you a dated service record if you ever need to show the system was maintained.
What happens during an intruder alarm service visit?
The engineer checks the panel log for recent faults, load-tests the batteries, walk-tests every detector, checks door contacts and tamper circuits, sounds the internal and external sirens and confirms the signalling or app link works. Anything worn or failing is reported, and small fixes can often be done on the spot. You receive a service report at the end of the visit.
My alarm company has closed down. Can you take over the system?
Often, yes. We will need to see the panel to confirm the make and model and whether the engineer code is available or can be reset. Some older or proprietary panels cannot be taken over economically, in which case we will explain what replacing them involves. If takeover is possible, the system is tested, documented and added to a servicing schedule.
Can you put right items on my insurer’s risk survey?
Yes. Send us the report or list of requirements and we will price each item separately so you can see what is needed. Typical requests include adding detection to unprotected areas, replacing failed components or upgrading signalling. Once the work is complete you get a written summary to forward to your insurer or broker as evidence the items have been dealt with.
Related services
Get in touch
Talk to an engineer about your building.
Free, no-obligation surveys and quotes for commercial, public and residential properties. Call us or drop us an email and we will get straight back to you.