Skip to content
Lumina Fire & Security

Security

Burglar Alarm Installation from Kent, across the South East

A well-designed burglar alarm is one of the most effective deterrents available. We install wired and wireless systems with app control and monitoring options.

Burglar Alarms for commercial, public and residential buildings

Wired and wireless burglar alarms that deter intruders and alert you instantly. Lumina Fire & Security, Kent-based, provides burglar alarms work across the South East.

What is included

  • Wired and wireless alarm systems
  • App control and notifications
  • Bells-only or monitored options
  • Pet-friendly detectors

Wired or wireless burglar alarms: the trade-offs

Wired alarms are hard-wired from each detector back to the panel, so there are no detector batteries to change and they suit new builds, refurbishments and larger premises. Wireless systems avoid lifting floors and chasing walls, which makes them quicker to fit in finished, occupied homes and listed buildings. Many installations are hybrid: wired where cable runs are easy, wireless where they are not.

  • Wired: no detector batteries, suits refurbishments
  • Wireless: minimal disruption in decorated rooms
  • Hybrid panels mix both on one system
  • Wireless detector batteries need periodic replacement

Bells-only, app alerts or monitored: how will you be told?

A bells-only alarm sounds an external siren and relies on someone nearby reacting. Adding app notification sends alerts to your phone so you can check, arm or disarm remotely. A monitored system passes alarm signals to a third-party receiving centre, which then follows an agreed procedure. Which one fits depends on how often the property is empty, who can respond, and what your insurer asks for.

  • Bells-only: simplest, relies on neighbours or passers-by
  • App alerts: you see what triggered and when
  • Monitored: signals go to a receiving centre for action
  • Keyholder arrangements agreed before go-live

Alarm grades and what your insurer may ask for

Intruder alarms are designed to a grade under BS EN 50131, from Grade 1 for low risk up to Grade 4 for the highest risk. Most homes fall at Grade 2, while many businesses with stock, cash or equipment are designed at Grade 2 or 3. Some insurers specify a minimum grade or signalling type in the policy, so it is worth checking the wording before the system is designed.

  • Grade 2: typical for homes and low-risk premises
  • Grade 3: common for higher-risk commercial sites
  • Grade affects detector, panel and signalling choice
  • Bring your policy wording to the survey if you can

Where detectors, contacts and the siren should go

An alarm is planned around the routes an intruder would use, not the number of rooms. Door contacts on every external door give early warning, while motion detectors cover hallways, landings and rooms that anyone moving through the building has to cross. Ground-floor rooms with patio or French doors usually get their own detection. The keypad sits near the main entry door so the entry timer can stay short, and the external siren goes high on a visible wall where it deters and is hard to reach. Detectors are kept away from heaters, fans and direct sunlight to cut false alarms.

  • Contacts on external and garage doors
  • Motion detectors on routes through the building
  • Keypad near the entry door with a short entry time
  • Siren high on a visible front or side wall

What you receive when the alarm is handed over

Before the engineer leaves, the whole system is walk-tested with you, so you see every detector and contact register on the panel. Your user codes are set, the engineer code is kept separate, and the app is installed on the phones of everyone who needs it. You are shown how to use full and part-set modes, how to omit a zone and what the common keypad messages mean. You also get written details of the zones and equipment fitted, along with the recommended servicing interval, so the system can be looked after properly from the start.

  • Walk test of every detector with you present
  • User codes and app accounts set for each person
  • Full and part-set modes explained
  • Zone list and servicing interval in writing

How the job works

  1. 1Free survey of entry pointsAn engineer looks at doors, windows, outbuildings and how you use the property, including pets and night-time movement, then talks through wired, wireless or hybrid options.
  2. 2Detector layout and quoteThe detector layout, grade, signalling choice and any app features are set out in an itemised quote, so you can add or remove items before agreeing.
  3. 3Fitting the alarmThe panel, detectors, contacts, keypad and siren are installed, with cables run neatly or wireless devices paired and signal-tested from each position.
  4. 4First set togetherWe walk-test the system with you, set your codes, link the app and arm the alarm together, so you are confident using it from day one.
Burglar Alarm Installation

Last reviewed: November 2026

Burglar Alarms: common questions

What affects the cost of burglar alarm installation?

Cost is driven by the number of detectors and door contacts, wired versus wireless equipment, the grade the system needs to meet, whether you want app control or a monitored connection, and how easy cable routes are. Ongoing costs such as monitoring subscriptions and servicing should be weighed too. After a free survey you get an itemised quote so you can see exactly what each part adds.

Will a burglar alarm work with pets in the house?

Yes. Pet-friendly motion detectors are designed to ignore smaller animals while still detecting a person. They work best when positioned so pets cannot climb onto furniture close to the sensor. Tell us about the size and number of pets at the survey, and where they roam when the house is empty, so detectors can be chosen and placed to suit.

Do I need a monitored alarm for my insurance?

Not always. Many home policies accept a bells-only or app-connected system, while some commercial policies require monitored signalling or a particular grade. The only reliable answer is in your policy schedule or from your broker. If you share the requirement with us, the system is designed to meet it rather than leaving you to discover a gap later.

How long does a burglar alarm installation take?

A wireless system in a typical house is usually the quickest to fit, because there is little cabling to run. Wired systems and larger commercial premises take longer, depending on how many detectors are needed and how cables are routed. You will be given an expected timescale with the quote, and the system is tested and explained to you before the engineer leaves.

Get in touch

Talk to an engineer about your building.

Free, no-obligation surveys and quotes for commercial, public and residential properties. Call us or drop us an email and we will get straight back to you.