
Fire doors · Kent
Fire doors in Kent
Lumina Fire & Security supplies and installs certified fire doors across Kent, working from our base in the county. We fit FD30 and FD60 doorsets with the right seals, closers and signage for HMOs, converted houses, care homes, schools and holiday lets, and replace or repair doors that have failed an inspection.
- FD30 + FD60Certified doorsets supplied and fitted
- Seals to signsFull ironmongery, not just the leaf
- FreeSurvey of doors and frames
Fire doors for HMOs and converted houses
Kent has a large number of houses in multiple occupation and Victorian houses split into flats, particularly in university and commuter towns. In these buildings the doors from each room or flat onto the shared stairs protect the escape route, and housing teams commonly expect them to be self-closing FD30 doors. We replace standard internal doors with certified doorsets, or upgrade sound existing ones where that is genuinely possible.
- FD30 doorsets to rooms opening onto escape routes
- Self-closing devices that actually close the door
- Intumescent and smoke seals fitted to the frame or leaf
- Fire door signage where required
Why fire doors fail inspection
Most failures are about the gaps and hardware rather than the door itself. Gaps around the edges should usually be about 3mm, closers get disconnected or wedged open, seals are painted over or missing, and hinges or locks are swapped for non-rated parts. Where the leaf is damaged, the frame is unsuitable or the certification cannot be traced, replacing the whole doorset is usually more reliable than patching it.
- Excess gaps at the head, sides or threshold
- Missing, damaged or painted intumescent strips
- Closers removed, disconnected or held open
- Non-rated hinges, locks or glazing fitted later
Care homes, schools and holiday lets
Care homes rely on fire doors to protect residents who may need to stay in place while staff manage an evacuation, so doors must close and latch every time. Schools see heavy daily use that wears hinges and closers quickly. Holiday lets and guest houses along the Kent coast often need doors upgraded when a fire risk assessment is updated. In busy corridors, hold-open devices linked to the fire alarm keep doors open safely and release them on alarm.
- Heavy-duty closers and hinges for high-traffic doors
- Hold-open devices that release on fire alarm
- Bedroom and kitchen doors in guest accommodation
- Remedial works after a fire risk assessment
How the job works
- 1Survey doors against the risk assessmentWe check which doors the fire risk assessment or inspection report flags, and look at each frame, leaf, gap and fitting.
- 2Recommend repair or replacementFor each door we say whether remedial work will bring it up to standard or a full certified doorset is the safer choice.
- 3Fit doorsets and ironmongeryDoors, frames, seals, closers, hinges and signage are installed to the manufacturer’s certified fitting instructions.
- 4Check gaps and record each doorWe measure the gaps, test that every door closes and latches, and give you a record of what was fitted where.
What you get from Lumina in Kent
- Kent-based, fitting fire doors in HMOs, care homes, schools and coastal guest accommodation across the county.
- Straight advice on when a door can be repaired and when it really needs replacing.
- Fire doors, fire alarms and hold-open devices from one contractor, so the whole escape route is joined up.
More local services
Official guidance
- Fire door guidance for blocks of flats (GOV.UK)
- Fire Safety (England) Regulations 2022 (GOV.UK)
- Workplace fire safety: your responsibilities (GOV.UK)
Last reviewed: November 2026
Common questions
Does my HMO in Kent need fire doors on every bedroom?
In many HMOs, yes: doors from bedrooms and kitchens onto the shared escape route are commonly expected to be FD30 and self-closing. The exact requirement depends on the size and layout of the property, your fire risk assessment and your local council’s housing standards. We can survey the property and explain what the assessment is likely to need.
Can an existing panelled door be upgraded to a fire door?
Occasionally, with specialist products, but it is often not practical or cost-effective, and it can be hard to show the result performs as a fire door. A certified FD30 doorset with a matching frame gives you traceable certification. We tell you honestly which route makes sense for each door.
Can you replace just the doors that failed our inspection?
Yes. Send us the inspection report or fire risk assessment and we will price the specific doors and remedial items listed, whether that is a new doorset, adjusted gaps, new seals or a replacement closer.
Get in touch
Talk to us about Fire Doors in Kent.
Free, no-obligation surveys and quotes for commercial, public and residential properties. Call us or drop us an email and we will get straight back to you.