Skip to content
Lumina Fire & Security

Access control · Kent

Access control in Kent

Lumina Fire & Security installs, services and repairs access control and door entry systems across Kent. From our Kent base we fit fob, card and keypad entry, video intercoms and gate entry for business parks, industrial units, schools and gated residential developments, and we link door locks to the fire alarm so exits release safely.

  • Fob, card, keypadEntry methods to suit the site
  • Fire-linkedDoors release when the alarm sounds
  • Install + serviceRepairs and call outs after handover

Access control for business parks and industrial units

Units on estates around Ashford, Aylesford, Sittingbourne, Dartford and the Medway towns often share entrances, have shift workers coming and going, and need to keep warehouse areas separate from offices. Fob or card readers let you give each person access to the doors they need and remove a lost fob straight away rather than changing locks. Audit trails show who used which door and when.

  • Fobs and cards issued and cancelled centrally
  • Different access levels for offices, stores and yards
  • Time schedules for shifts and out-of-hours
  • Entry logs to check who went where

Schools: visitor entry and safeguarding lobbies

Schools across Kent need to control who gets past reception without slowing the start and end of the day. A common layout is an entry lobby where visitors are seen and spoken to over a video intercom before the inner door is released by staff. Staff use fobs on internal doors, and every locked door on an escape route is linked to the fire alarm so it unlocks when the alarm activates.

  • Video intercom at the main visitor entrance
  • Staff-released inner doors for safeguarding lobbies
  • Fob access for staff on internal doors
  • Fire alarm release designed in line with BS 7273-4

Gated developments and gate intercoms

Gated residential developments and private drives need gate entry that residents find simple and visitors can use without a fob. Video or audio intercoms at the gate can call a handset in each home or a resident’s phone, depending on the system. We install the intercom, readers and locking, and work alongside your gate installer on the motor and safety side where the gates themselves are not ours.

  • Gate intercoms that call handsets or phones
  • Keypad codes for deliveries and visitors
  • Fob readers on pedestrian gates and doors
  • Servicing and repairs for existing door entry

How the job works

  1. 1List every door and who uses itWe go through each entrance, internal door and gate with you and note who needs access, when, and which doors are on escape routes.
  2. 2Choose readers, locks and intercomsMaglocks, electric strikes, exit buttons and readers are chosen per door, with the right lock for the door frame and fire rating.
  3. 3Link escape doors to the fire alarmDoors on escape routes are wired to release on alarm and checked during commissioning with a live fire alarm test.
  4. 4Load users and train the administratorWe set up the first users and access levels, then show your administrator how to add, remove and review fobs.

What you get from Lumina in Kent

  • Access control and fire alarm work from one contractor, so the fire release on locked doors is set up and tested properly.
  • Kent-based and covering the whole county, from coastal schools to business parks off the M20 and M2.
  • Servicing and call outs after installation, including existing systems fitted by others.

Official guidance

Last reviewed: November 2026

Common questions

Do locked doors have to open when the fire alarm goes off?

Doors on escape routes that are held by electronic locks must release so people can get out. This is normally done by linking the access control to the fire alarm panel, with a green break-glass release by the door as a backup. We design this link in line with BS 7273-4 and test it with the fire alarm during commissioning.

Can we add fob access to some doors and keep keys on others?

Yes. Many sites start with the main entrance and a few sensitive rooms, such as a server room or stock area, and add more doors later. We plan the system so it can grow without replacing the controller.

Can you repair a door entry system someone else installed?

Often, yes. We diagnose faults on most door entry and access control systems, from failed maglocks and exit buttons to intercom handsets. If parts are no longer available, we explain the options for upgrading only what is needed.

Get in touch

Talk to us about Access Control in Kent.

Free, no-obligation surveys and quotes for commercial, public and residential properties. Call us or drop us an email and we will get straight back to you.